For the final project, I made a switch which could be triggered by human touch the feather.
- Wood sheet;
- Copper Tape;
- Hot Glue;
- Soldering tools;
- 3V battery;
I did spend some time thinking about the circuit of how can make it work.
First I know that I need parallel; But where to put the break (switch) and also incorporate with the aesthetic placement of the LEDs is a little bit tricky. I only want to light up one LED at a time when the feather touching on one corresponding switch.
Finally the circuit work out like this:
Start placing the LEDs on the wood sheet. Facing different directions to light up.
Adding feathers layer by layer.
Video testing the circuit: