Goal:
The goal of this project is to build a combination lock that uses 4 buttons and LEDs that indicates lock status.
Components:
red led x1
green led x1
blue led x1
button x4
resistor(200Ω) x4
resistor(10kΩ) x4
arduino board & breadboard
How it works
Users need to input a combination of 4 numbers to open the lock. The blue button is a reset light which will light up 5 seconds after the right code is input (The lock is locked again, the input is reset ) or the wrong four numbers are input (meaning please try again, the input is reset). The red light means a wrong code is pushed and the green light means the code is correct.
Code: https://github.com/joycemolly/pcomp–lock-combination/blob/master/homeworkLock.ino