Apr 18, 2011

PCB Etch for ProtoBoard Back

The entire design cut out and ready to be moved to the copper fabric.

Lay the copper fabric over the board.

Do a quick but delicate flip so the copper is the bottom layer.

Remove the board (neoprene)

Tape down the pattern to the copper so it won't move as you apply the vaseline.

Apply the vaseline. For technique, rub lightly over shapes and press harder over thin lines/connectors.

The lubed up final product.

Pattern removed from the fabric.

Submerge in salt and vinegar bath (used solution from HOW TO GET WHAT YOU WANT)

After submerged for 10 hours

Transparency (it's real!)

Leave a comment