Creativity & Computation Lab » kooh125

Final Project

kooh125 — Thu, 20 Dec 2012 08:43:49 +0000

Final Project – Piano Player

Processing was used to see the motions as the piano is played. Since it is the holiday season, I chose a Christmas carol, Jingle Bell, for the song. Using Jingle Bell’s music note, press the right note on the piano and a motion is played telling a story. The motion does not play if you press the wrong note.

Github Link

Vimeo Link

OpenFrameWorks_Project2

kooh125 — Thu, 20 Dec 2012 08:37:48 +0000

ofxVectorGraphics addons + class project

Vimeo Link

Github Link

Midterm Project

kooh125 — Thu, 20 Dec 2012 08:34:36 +0000

I made a piano player using processing and iPhone, something that is friendly and easy to play. I chose iPhone so that people can play by tapping on the screen rather than clicking a mouse and a keyboard.

Github Link

OpenFramworks

kooh125 — Thu, 06 Dec 2012 15:14:35 +0000

When I used openFrameworks, it was different from Processing because openFrameWorks is similar to c++ and is divided into draw, update and setup, whereas Processing is closer to Java and uses draw and setup. Because the language used in openFrameworks was different, there were many errors at first. I had to find everything which took me a long time but overall it was a good experience.

openprocessing Link

Github Link

Vimeo Link

Week9 / Realtime Data Visualization

kooh125 — Mon, 29 Oct 2012 18:33:13 +0000

vimeo link

github code link

I made Realtime Data visualization using an arduino, processing and sensor input. I try to tested flex sensor,force sensitive resistor, photocell and tilt sensor. Finally, I used force sensitive resistor and other sensors are sensitive so did not work very well.

- Instruction -

Circle automatically be drawn center of stage.when you pressed force sensitive resistor, circle shape draw little bigger and when mouse is clicked, it will reset to new start.

Week8 / Rube Goldberg Machine

kooh125 — Tue, 23 Oct 2012 08:39:44 +0000

vimeo link

github mov link

github code link

I made a small Rube Goldberg machine using pressure sensor and servo motor. I needed something that had movement so I bought two kinds of DC Motor and also a Motor shield kit. But it was still not easy to do and I changed to servo motor. For pressure sensor, I just wanted to try it and chose two kinds of sensor to play with.

1. Press pressure sensor

2. When the servo motor pushes the blue car forward, the blue toy starts to shake its arms and feet

3. Small blue car knocks down the wood piece

Week7 – animal

kooh125 — Tue, 16 Oct 2012 04:02:33 +0000

I made an animal using Arduino and Arduino Uno for the first time. When I got the assignment, I had no idea what to make. But after seeing other classmates’ posts, I figured it out and made a crocodile. Actually, I saw crocodile character on the webpage so I used this character on my project. I used 12 LED (3 red and 9 green) and I tried to connect ground, 9, 11 and 12. For next time, I would like to make one using a speaker.

Github(mov)

Github(Arduino Code)

Vimeo(mov)

int ledPinA = 12;

int ledPinB = 13;

int ledPinC = 9;

int brightness = 0;

int fadeAmount = 5;

void setup()

{

pinMode(ledPinA, OUTPUT);

pinMode(ledPinB, OUTPUT);

pinMode(ledPinC, OUTPUT);

}

void loop()

{

analogWrite(ledPinC, brightness);

brightness = brightness + fadeAmount;

if (brightness == 0 || brightness == 255) {

fadeAmount = -fadeAmount ;

}

digitalWrite(ledPinC, HIGH);

delay(2000);

digitalWrite(ledPinA, HIGH);

digitalWrite(ledPinB, HIGH);

digitalWrite(ledPinC, HIGH);

delay(100);

digitalWrite(ledPinC, HIGH);

delay(300);

digitalWrite(ledPinA, LOW);

digitalWrite(ledPinB, LOW);

digitalWrite(ledPinC, LOW);

delay(100);

digitalWrite(ledPinC, HIGH);

delay(2000);

digitalWrite(ledPinA, HIGH);

digitalWrite(ledPinB, HIGH);

digitalWrite(ledPinC, HIGH);

delay(100);

digitalWrite(ledPinC, HIGH);

delay(2000);

digitalWrite(ledPinA, LOW);

digitalWrite(ledPinB, LOW);

digitalWrite(ledPinC, LOW);

delay(100);

digitalWrite(ledPinC, HIGH);

delay(100);

}

Assignment6

kooh125 — Tue, 09 Oct 2012 05:05:05 +0000

Parallel and Series Circuit(Vimeo)

Schematic and Calculation (JPG)

Parallel and Series Circuit (Github)

Github Text

I’m excited to make a something with LED but I’m still confused about it.
I didn’t know where to put the wires correctly that I burnt two of the bulbs.
Also, I don’t know if my calculations for voltage, resistance, and current is right.

Assignment 3 + 4 – Music Player

kooh125 — Tue, 02 Oct 2012 03:01:08 +0000

for last week, my assignment3(music player) was did’t work correctly and Liza told me to finish it for assignment4 (using one library and class).
I’m using a minim and 2 classes to make music player!! Here is the link to the code on github.

Instruction
- Choose Song and Artist (same as iPhone player)
1. Christina Aguilera – What A Girl Want
2. Bruno Mars – It Will Rain
3. Carly Rae Jepsen – Call Me Maybe
- Play / Stop : Control music to play and stop
- Playlists : Go back to main page

Assignment 3 – Music Player

kooh125 — Tue, 18 Sep 2012 04:07:05 +0000

Upload failed 4 times

I made a music player. First, I made three sections which are: Main (setup page), Artist (picked artist) and Music (picked music). Then I used two classes and an array. In the Main page, there are three songs listed. When you select a song, it takes you to a page with the Artist and Music. On that page, you can control the buttons to play and pause the song. Playlists button that can take you back to the Main page is located on top of the page. For this project, it took me a long time to come up with an idea of what I can create using two classes and one array. Once I practice processing and work more with it, I will be able to create more advanced player with multiple playlists and songs (at least more than three songs.)